BEMIS bio Bidet A8, Руководство пользователя

Страница: 4 / 19

6 7
CAUTIONS BEFORE INSTALLATION
NOTE THE FOLLOWING IMPORTANT POINTS
1. Do not install in a location where water might be splashed on this
appliance or in a location exposed to excessive moisture where
condensation might form on the product’s surface.
2. To avoid damage to electronic components due to high levels of
humidity, provide adequate ventilation by opening a window
and/or door when bathing.
3. The water supply should have a water pressure of 0.07 MPa to 0.74 MPa.
4. Connect the product to a pipe carrying potable water. Do not connect to
an industrial water line or other water supplies that are not potable.
5. Bring the unit to room temperature.
6. The thermal protector in the water tank may
malfunction when transporting or storing warm water.
7. The rated power voltage in AC 120V, 60Hz
8. Do not plug the unit in until installation is complete.
It may result in malfunction.
WIRING REQUIREMENTS
1. After installation, all other servicing should be performed
by authorized service representatives.
2. Grounding Instructions
This product should be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire
for the electric current. This product is equipped with a cord having a
grounding wire and grounding plug. They must be plugged into an outlet
that is properly installed and grounded.
DANGER - Improper use of the grounding plug can
result in a risk of electric shock.
If it is necessary to repair or replace the cord or plug, do not connect
the grounding wire to a flat blade terminal. The grounding wire can be
identified by its insulated outer surface. It will either be colored green
or will not contain yellow stripes.
Check with a qualified electrician or serviceman if you do not
understand the grounding instructions or if you do not know whether
the product is properly grounded.