BEMIS bio Bidet A8, Руководство пользователя

Страница: 8 / 19

14 15
INSTALLATION
If electric work is needed, please contact a qualified
electrician or serviceman only.
Remove the Existing Toilet Lid and Seat
1. Remove the nuts, washers, and cone packings from the
toilet seat and mounting bolts in the back of the toilet.
2. Remove the toilet seat, lid, and mounting bolts.
3. Keep them in case you need them.
Toilet Size (Elongated)
The toilet dimensions must be within
those shown on the right. Do not install
this appliance on a toilet that does not
meet these dimensional requirements.
16.93(A8s)
18.50(A8)
Occupied Sensor
1. This appliance is equipped with
an occupied sensor.
2. The unit will not work unless
the seat is occupied.
Mounting the Plate
Place the mounting plate over
each mounting hole. Insert the
mounting bolts through the plate
and mounting holes. Slide cone
packings and washers onto the
bolts and fasten tightly
with nuts.