Windshield Bracket Assembly
The visor clip is fully assembled.
To assemble the windshield
bracket, follow this diagram.
Windshield Mounting
1.
Remove the mounting bracket
cover on top of the unit by
pressing on the raised dots and
pushing outward. Store the cover
in a safe place.
2
.
Clean the selected windshield area, position the suction-cup
mount on the windshield, and press firmly on each suction
cup to secure it in place.
3.
Use a screwdriver or a small coin to adjust the angle of the
suction-cup mount until the base plate is level.
4
.
Slide detector onto base plate until it snaps into place.
Note—some vehicles have a plastic coating on the inside of the
windshield designed to protect occupants in case of an accident.
Use of the windshield bracket on this type of windshield can
permanently mark the surface. Check with your dealer if you
are unsure whether your vehicle is equipped with this type of
windshield.
Windshield Bracket Assembly
