Safety Warning System
®
(sws
™
) with Digital Voice Messages
(North American Mode only)
When “
SWSv o i c e
” is selected, unit will provide Digital Voice
announcements when
sws
™
transmitters are detected. Factory
setting is “
SWSv o i c e .
” When “
SWSt o n e
” is selected, Digital
Voice is replaced by “tone/clicking” only. Factory setting is
“
SWSv o i c e
”.
Audio/Visual Scroll Rate
When “
SCRLs l o w
” is selected, unit will provide a slow cycling
of audio/visual messages.When “
SCRLf a s t
” is selected, unit
will provide a fast cycling of audio/visual messages. Factory
setting is “
SCRLs l o w
” .
Note: When in
TRAVEL
mode, you’ll notice the number of
Selectable Features increases to include all international Radar
frequencies. Each of the 10 international frequencies may be
selected
on
or
off
, depending upon your driving environment.
To view all international frequencies, engage
TRAVEL
mode.
(see page 10).
Entering Selectable Features Mode
1.
With the unit
off
, press and hold the
cty
button, then press
the
pwr
button. The word “
FEATURES
” will appear in the
display and a short audible “beep” will sound indicating you
are now in the Selectable Features Mode.
2.
Immediately after the “beep”, the display will show the status
of the first Selectable Feature.
3.
Press the
aud
button to make your selection. Press the
cty
button to move to the next Selectable Feature or press the
drk
button to move backward in the list. Repeat the process
until you have made your selection for each of the
eight Selectable Features.
4.
Press the
pwr
button to exit Selectable Features mode. Two
“beeps” confirm that you have exited this mode and either
“
HI GHWAY
” or “
CITY
” will be presented in the display, based
on your previous selection. Your unit is ready for operation.
