Belshaw-Adamatic Bakery Group HG18/HG24 Donut Glazers, MN-1744
CALL 206-322-5474 or EMAIL [email protected] for SUPPORT
4
About the HG18-HG24 Series
Glazers
The HG18-HG24 Series glazers are
designed to glaze donuts on the top
and sides with an even distribution of
glaze.
•
HG18EZ and HG24EZ Glazers
use the EZLift rail system. The
glaze applicator slides on a
frame above the glazer.
•
HG18C and HG24C Glazers
have no frame. The glaze
applicator is held directly by the
operator.
The HG18-HG24 Series Glazers are
designed to be used on a level floor.
The HG18-HG24 Series Glazers
produce 0.0 dB(A) of equivalent A-
weighted sound pressure at
workstations. This has been
determined because there is no
machine-driven operation. Operation
of the HG18-HG24 Series Glazers is
by a human operator.
Thorough understanding of how to
safely operate, clean, and maintain the
The HG18-HG24 Series Glazers will
prevent production delays and injuries.
The operator must work safely at all
times, read and follow the instructions
in this manual, and heed all warnings,
including the following:
DO NOT OVERFILL the Glaze
Kettle. If glaze overflows the
Kettle, it could cause someone to
slip on the floor and be seriously
injured.
BE CAREFUL never to get glaze,
water, or other materials on the
floor. If anything does get spilled
on the floor, clean the area
immediately. Materials on the floor
can cause people to slip or fall,
resulting in serious injury or loss of
life.
TO AVOID damaging the glazer,
never use force to assemble,
disassemble, operate, clean, or
maintain it.
TO PREVENT damage to the
Kettle, never scrape it with a
metal object. Use only a plastic or
rubber bowl scraper.