Belmont Bel-Cypher N, Руководство по установке, Страница: 48 / 57

Bel-Cypher N
6.3.Change IP address of NIC
※
※ ※
※
Change IP address of NIC, after you changed IP address of Bel-Cypher N and IP address of
sensor.
1) Go to
「
Control Panel
」→「
Network and Internet
」→「
Network and Sharing Center
」→
「
Change adapter settings
」
2) Right click LAN Connection that is connected to Bel-Cypher N. Choose property.
3) Double click
「
Internet Protocol Version 4(TCP/IPv4)
」
in
「
The connection uses the
following items:
」
4) Enter IP address and Subnet mask
※ ※ ※ ※
Set IP address and Subnet Mask as NIC is included within sensor and Bel-Cypher N network.
5) Enter only IP address and Subnet Mask. Click
「
OK
」
to close windows.
6) Open
「
BEL_CYPHER_C.ini
」
in
「
C:¥BelCypherN
」
by text editor like notepad
7) Change SFLFIP=(in [ADR_PAN_NPX] section) to IP address of NIC.
Below sample shows “changing IP address to
「
169.254.87.182
」
”
[CMOS]
…
SELFIP=169.254.87.182
…
8) Save BEL_CYPHER_C.ini