Belmont Bel-Cypher N, Руководство по установке

Страница: 45 / 57

Bel-Cypher N
9) If you click Read, preset values are shown. Enter values in IP Address & subnet mask.
10) Values for default gateway should be all 0.
11) Set persistent IP ON.
12) Click
「
Write
」
then close window by clicking
「
×
」
on upper right corner to close
IP_Address_Change screen
13) Click
「
Close and Memory save
」
14) Click
「
×
」
on upper right corner to close GigE_IP_Tool_*_**.exe(if OS is 64bit,
GigE_IP_Tool_*_**_x64.exe)
15) Below message will be shown, click
「Ｏ
K
」
16) Wait at least two seconds, then turn on the power of Bel-Cypher N after closing
GigE_IP_Tool_*_**.exe(or GigE_IP_Tool_*_**_x64.exe)
(7)
(8)
(9)