33
SENDING TONE SIGNALS IN PULSE DIALING MODE
If your telephone line uses pulse dialing (such as for a rotary dial phone), you can
tem porarily override the Pulse Mode setting with the Tone Mode until the unit goes
back on-hook. This may be necessary to access certain special services such as
bank-by-phone services:
1. Use pulse dialing to call the service.
2. W hen the service answers, press [
].
3. Follow the normal procedure for the special service you are using. Any additional
num bers you dial are sent as tone signals.
4. W hen you hang up, the telephone returns to pulse mode.
DIAL VOICE MAIL
If you have subscribed to the Voice Mail and Message W aiting Indicator services, you
can access your voice m ail system by pressing [DIAL V.M.]. To use this feature, you
m ust first program your voicemail access num ber into the handset and base unit.
Program your own Voicemail access number
Press the [DIAL V.M.] softkey.
Press the [EDIT] softkey, you will then be prompted to
“ENTER NUMBER :”.
Enter your access number. If you m ake a m istake,
press [DELETE] to erase the last digit and re-enter.
Press [SAVE] to confirm programming.
You are now ready to use the
Dial voicemail
key.
Using DIAL V.M. softkey
Press the softkey [DIAL V.M.]. Your 7-digit access
num ber will be displayed.
DIAL VOICE MAIL
-----------
EDI
T EXI
T
ENTER NUMBER:
1234567_
EXIT DELETE
SAVE
DIAL VOICE MAIL
1234567
EDI
T EXI
T
ADVANCE D OP E RAT ION
All manuals and user guides at all-guides.com
