32
FLASH
Call W aiting
1. Use [Flash] for accessing Call W aiting service. For exam ple, if you receive a
second call during your initial call, press [Flash] to swap to the waiting call and put
the initial caller on hold.
2. After you finish the conversation with the second caller, press [Flash] to return to the
first caller.
Note:
If you also have conference Three-W ay Calling service, press [Flash] to allow the
first caller to enter into a conference call with you and the second caller.
PAUSE
The [Pause] key allows you to add a 3-second pause in a phone number sequence
during pre-dialing or storing number in the Phone Book Directory.
Enter a Pause in Dialing Sequence
To add a pause, press [Redial/P] at the desired position when you are creating or
editing a phone number and “ P ” appears on the display. For a longer delay, press
[Pause] additional times.
Note:
Rem em ber, the phone num ber you wish to store cannot have more than 32 digits,
including any pause. Each “
P
” counts as one digit.
HOLD
A call can be put on hold during conversation to allow you to m ake a separate phone call
using the other line or to be picked up by another handset.
W hen engaged with an external line on the handset,
press [HOLD] softkey.
W hen the line is on hold, “L1 HOLD” appears on the
handset display. The Line in use indicator in the base
unit will keep flashing
Note :
The call can be picked up by the base unit or any handset registered to the sam e
base unit by pressing the corresponding
LINE
key..
L1 ON
HOLD
SERVICE DIR.
DI
AL V.M
L1 HOLD
HS- 1
08:30
AM
7/04
SAVE SERVICE MENU DIR.
DI
AL V.M
ADVANCE D O PE RATIO N
All manuals and user guides at all-guides.com
