16
Changing drained handset battery in the middle of a call
W hen the handset displays “LOW BATTERY” in the m iddle of a telephone call, you can
swap the call to the base unit speakerphone first and then change the handset battery
following these sim ple steps:
1. Press the
LINE
key with the In-use indicator lit on the
base unit. The call is then transferred to a 3-way call
conference between the handset, the base unit and the
external party.
2. Press the [Bye] key on the handset; the
call will be totally swapped from the
handset to the base unit speakerphone.
3. Take out the spare battery from the base unit battery compartment
and replace it to the handset.
4. Press the
LINE
key (the in-use line) on the handset and
press the [Bye] key on the base unit to swap the call back to
the handset.
Note: Make sure the drained battery is put in the base unit
battery com partm ent to be re-charged.
REGISTRATION & DE-REGISTRATION OF HANDSET
The first registered handset will be autom atically assigned as HS-1 to the base unit.
W hen additional handsets are registered to the system , they will be assigned extension
num bers in the following sequence: HS-2, HS-3, and up to HS-8.
On the Base Unit:
Press [MENU] and “REGISTRATION” appears on the
display.
Press [O.K.] and “W AITING REGISTER” is displayed.
You are now ready to register your handset.
Note:
The base unit will return to standby m ode if no
handset registration takes place within 25 seconds.
REGISTRATION
O.K. EXIT
WAITING REGISTER
EXI
T
GET T ING START E D
1
2
3
4
All manuals and user guides at all-guides.com
