Bellini BBT100, Руководство пользователя

Страница: 11 / 16

11
Troubleshooting
Problem Possible Cause Solution
The appliance does not heat. Thermostat has cut off the
power. Turn the control dial to Reset
position.
The appliance does not blend. Interlock switch not activated. Replace the blender bowl and
lid to correct postion.
The steaming light does not
go on. The appliance is not connected
to the mains. Put the plug in the wall socket.
Control dial not set at the
Steam position. Turn the control dial to Steam
postion.
Thermostat has cut off the
power. Turn the control dial to Reset
position.
The ingredients have not
heated up completely. The pieces in the bowl are too
big, there is too much food
in the basket or you have not
steamed the food long enough. Cut the food into smaller pieces
(-cm), decrease the amount
of food in the basket or select a
longer steaming time (max. 0
minutes).
The appliance does not steam. You have not put water in the
appliance. Switch off the appliance and
put the right amount of water in
the tank.
Steaming takes too long or the
steam function does not work
at all. There is too much scale in the
water tank. Descale the water tank.
The blade unit or motor unit is
blocked. There is too much food in the
bowl. Switch off the appliance and
process a smaller quantity. Do
not fill the bowl beyond the
Max. level.
The motor unit gives off an
unpleasant smell during the first
few times of use. This is normal. If the appliance continues to
give off this smell after you
have used it a few times,
check whether the processing
quantities and times are
correct.
Steam basket handle becomes
loose when it is hot. This is normal. Handle will tighten once
appliance has cooled down.
The appliance continues to
give off an unpleasant smell
after I have used it a few times. There is too much food in the
blender bowl or you have let
the appliance blend for too
long. Process smaller quantities and
do not let the appliance blend
for more than 0 seconds at a
time.
The appliance makes a lot
of noise, feels hot to touch or
omits smoke etc. There is too much food in the
bowl. Switch off the appliance and
process a smaller quantity.
The appliance has been
blending too long. Do not let the appliance blend
for more than 0 seconds at a
time.
The lid of the bowl leaks. Lid has not been placed
correctly on the bowl. Assemble the lid on the bowl
correctly.
There is too much food in the
bowl. Switch off the appliance and
process a smaller quantity.