Bellini BBT100, Руководство пользователя

Страница: 7 / 16

. Place the lid on the steamer basket.
8. Turn the control dial to the steaming position.
The steaming indicator will light up to indicate
that the appliance is steaming.
9. When the food has steamed, turn the control
dial to the “off” position. Wait minutes
before removing lid to ensure no more steam
releases from the steam outlet.
10. If you want to serve the steamed baby food
without blending it, test the food to make sure
it is at a safe temperature for your baby.
11. If you would like to blend the steamed food,
please follow the Blending instructions.
Note: You can find recipes and the
cooking times required within this
manual.
Note: Do not steam frozen ingredients
because the appliance cannot heat up
frozen food to the temperature required
for steaming. Always defrost frozen solid
ingredients before you steam them in
this appliance. Shake off any excess
water from the defrosted ingredients
before you place them in the steamer
basket.
Note: Do not process a large quantity
of solid ingredients at the same time.
Process these ingredients in a series of
small batches instead.
Warning:
Hot steam or hot water could burn
your fingers. Do not touch and never let children
touch hot parts and steam, as this may cause
scalds.
Note: The steaming time depends on
the amount of water you have put in the
water tank.
Note: If you want to steam another batch
of ingredients, let the appliance cool
down for 10 minutes, turn the control
dial to Reset position before you start
steaming again.
Auto Cut-Out Reset
This appliance is equipped with an overheat
protection. It will cut off the power automatically
if the water is heating dry. The steam indicator
will go out at the same time.
To start your next steaming process, wait for the
appliance to cool down and turn the control dial
to the reset position.
Blending After Steaming
1. Place the blender bowl with the blades on
the base and turn to the “lock” position.
. Place steamed food into the bowl. If
necessary, add additional ingredients for
blending (e.g. water or oil).
. Place the lid on the blending bowl and turn
to the “lock” position.
. Turn the control dial to the blending position.
Hold the knob in this position until the food is
properly blended.
5. When you have finished blending,
simply release the control dial. The dial
automatically returns to the off position.
. Remove the blended food from the bowl. If
necessary, use a spatula. Make sure that the
baby food is at a safe temperature for your
baby.
. Unplug the appliance.
Warning:
This appliance is equipped with a
built-in safety lock. This appliance only functions if
you have correctly assembled the lid.
Warning:
Do not let the appliance blend for
more than 0 seconds at a time. If you have not
finished blending after 30 seconds, switch off the
appliance and wait minutes before continuing.
If the appliance becomes hot, let it cool down
for a few minutes before before continuing.
Note: If the ingredients stick to the wall
of the bowl, switch off the appliance and
loosen them with a spatula or add liquid.
Note: Make sure that the blended baby
food is at the right consistency (e.g. no
lumps) before serving.
Note: If the baby food is still too solid
add liquid (e.g. water) until the baby
food is soft and smooth.