manualshive.com logo in svg

Bellfires VIEW BELL TOPSHAM 3 LF, Руководство по установке, Страница: 51 / 84

Поделиться
Скачать
Bellfires VIEW BELL TOPSHAM 3 LF Скачать руководство пользователя страница 51

51

Bell

fi res

Installation instructions

BUILDING IN / HANGING OF THE APPLIANCE

Bar set:   •   2x draw bars
 

•   2x tension sleeves

 

•   2x M6 hooks

 

•   2x brass expansion  

 

  plugs M6

First remove the 2 mantle iron transport-spacers “REMOVE” 

Note!

     Temporarily support the mantle iron, so that it does not fall forwards.

Mantle iron (option).

   -   BUILT-IN APPLIANCE / WALL-MOUNTED APPLIANCE

The optional mantle iron is intended for supporting the brickwork above the appliance 

(chimney), or by applying other non-fl ammable materials over the appliance (cove). 
The mantle iron must rest on the brickwork on both sides so that upward building is 
possible. Level the mantle iron with the supplied bar set.
Keep a clearance of 0.1

"

 (2 mm) between the mantle iron and the top of the side 

panels.

The brickwork/plating must never rest direcly on the appliance.

Содержание VIEW BELL TOPSHAM 3 LF





















































































Отзывы:

Нет отзывов