Bell Phones Excursion 39606, Руководство пользователя

Страница: 25 / 26

Cannot access
Remote Operation
•
The password you have entered may be incorrect. Enter the
correct password during OGM playback or within 7 seconds
after the OGM has finished playing.
Excessive static
•
Ensure that the antenna is not touching another metal object.
•
Refer to the section "Improving Cordless Reception".
Incoming calls/ Memo
messages are cut off
•
The Excursion
®
39606 will stop recording after 7 seconds of
continuous silence or 7 seconds after the caller hangs up
(VOX feature).
•
Each incoming message recording is limited to two minutes
to conserve message storage space.
Announces
“
Memory Full ”
•
The 15-minute recording limit may have been reached. Erase
old messages to make room for new messages.
TECHNICAL INFORMATION
This cordless phone uses radio frequencies to allow mobility. There are certain difficulties in
using radio frequencies with a cordless telephone. While these are normal, the following could
affect the operation of your system.
NOISE: Electric pulse noise is present in most homes at one time or another. This noise is
most intense during electrical storms. Certain kinds of electric equipment such as light
dimmers, fluorescent bulbs, motors, and fans also generate noise pulses. Because radio
frequencies are susceptible to these noise pulses, you may occasionally hear them in your
handset. Generally, they are minor annoyances and should not be interpreted as defects in
your system.
RANGE: Because radio frequencies are used, location of the base unit can affect operating
range. Try several locations in your home or business and pick the one that gives you the
clearest signal.
INTERFERENCE: Some electronic devices operate in and/or generate interference near the
operating frequencies of your cordless telephone. While several protection circuits are used to
prevent unwanted signals, there may be periods when these unwanted signals cause
interference. If interference occurs frequently, it can be minimized or eliminated by lowering
the height of your base antenna or by relocating the base unit. You can check for interference
before selecting the final base unit location by plugging in the phone.
AUTOMATIC DIGITAL SECURITY : This system helps protect the privacy of your telephone
conversation from other cordless phones nearby. Whenever the handset is returned to the
base, a new security code between the
handset and base is randomly generated (up to 1
million combinations).
NOTE: If replacing the handset battery, the system ID is lost, along with the link between the
handset and base. In order to reestablish the security ID, return the handset to the base until
the CHG (Charge) / IN-USE LED indicator lights and a beep is heard.
ADAPTER:
Use only with Class 2 Power Source 9VAC 400 mA.