B.
FROM THE HANDSET (In the Base Unit Cradle)
1.
When the Excursion
®
39606 answers a call, you will hear your OGM followed by the
caller's message through the base unit’s speaker.
2.
If you decide to take the call, simply pick up the handset and press the TALK button.
Begin speaking and the ICM recording is stopped. The recorded message is stored in
memory and the message count is incremented by one.
C. FROM THE EXTENSION PHONE
1.
When the Excursion
®
39606 answers a call, you will hear your OGM followed by the
caller's message through the speaker.
2.
If you decide to take the call, just lift the handset of the extension phone on the same line
as the Excursion
®
39606 and press star (
*
) button twice. The ICM recording is stopped
and the recorded message is stored in memory while the message count is incremented
by one.
TWO- WAY RECORDING
Two- Way Recording allows you to record your conversation with another caller. Two-Way
recording can be enabled during TALK mode while you are using the handset. Two-Way
Recording(s) is stored in Message (MSG) box.
1.
While in TALK mode, press and
hold
the PAGE / 2-WAY
REC button of the base.
2.
Release the PAGE / 2-WAY REC button to end your Two-
Way recording. (Figure 28)
NOTE:
NOTE: If memory is full, the unit will announce
“
Memory full.
”
and Two-Way
recording is not possible. You can erase any or all the messages remotely after
listening to them. Refer to the REMOTE OPERATION section for more details.
Recording two-way conversations may be subjected to Local State and Federal laws
and regulations
VOX (VOICE ACTIVATED) DETECTION
During ICM recording, the Excursion
®
39606 uses
VOX (voice activation) to conserve
message storage space. The conditions for the Excursion
®
39606 terminating a recording are:
•
Continuous silence for seven seconds.
•
Seven seconds after the caller hangs up.
REMOTE OPERATION
Allows you to access most of the Excursion
®
39606 functions away from the base unit using
only the handset or any touch tone phone when you call the Excursion
®
39606. You can play,
review, repeat, skip, erase, and stop messages in the message boxes, record a Memo or an
OGM, set the Answer Mode ON or OFF, change your password, set time and day, activate the
call screening function and the Voice Menu.
USING THE REMOTE OPERATION FUNCTION
There are Two-Ways of using Remote Operation:
1.
Handset (Remote Unit), or
2.
Calling the Excursion
®
39606 from a Tone Dialing Phone
A.
USING THE HANDSET
1.
Press the REMOTE button to activate the remote function.
2.
The handset and base unit IN USE LED indicator will blink. (Figure 29)
B.
CALLING THE EXCURSION
®
39606 FROM A TONE PHONE
NOTE :
The factory preset password for remote operation is
“#58”
.
1.
Call the Excursion
®
39606 from a tone dialing phone.
2.
While the OGM is playing or during ICM recording, enter # plus your 2 digits password.
Содержание Excursion 39606
Страница 8: ......
