Bell Phones Excursion 39606, Руководство пользователя

Страница: 19 / 26

any new message(s) in the Message (MSG) box. You can hang up before the unit answers
and save the cost of the call.
OUTGOING MESSAGE (OGM)
This is the announcement callers will hear when Excursion
®
39606 answers a call. The
Excursion
®
39606 also has a default OGM (factory preset) which is active when there is no
OGM present.
Default OGM:
“Please record your message after the beep”.
RECORDING THE OUTGOING MESSAGE (OGM)
Outgoing Message (OGM) is recorded remotely on the handset. The maximum recording time
is 30 seconds.
1. In standby mode, press the REMOTE button on the handset. The Excursion
®
39606 will
prompt “You have no new message. For help, press 9.”
2. Press REC OGM button . The Excursion
®
39606 will prompt “Please record your
announcement after the beep. To stop, press star (*).”
3. After hearing a long beep, begin your announcement.
4.
Press star (*) to stop recording and the Excursion
®
39606
will playback once automatically for your review. (Figure 20)
5. Press REMOTE button to exit the remote mode. Otherwise,
the unit will automatically turn off if not in use for 8 seconds.
CHECKING THE OGM
1.
In standby mode, press the OGM PLAY button on the base
unit to hear your previously recorded OGM.
2.
You can stop OGM playback anytime during playback by (Figure 21)
pressing the STOP button on the base unit.
RECORDING A MEMO
Memo message(s) is recorded remotely on the handset. The maximum recording time is
2 minutes.
1.
In standby mode, press the REMOTE button on the handset. The Excursion
®
39606 will
prompt “You have no new message. For help, press 9.”
2.
Press MEMO REC button . The Excursion
®
39606 will prompt “Please record your
message after the beep. To stop, press star (*).”
3.
After hearing a long beep, begin your message.
4.
Press star (*) to stop recording.
5.
Press REMOTE button to exit the remote mode. (Figure 22)
Otherwise, the unit will automatically turn off if not in use for 8 seconds.
PLAYING BACK MESSAGES
If the MEMO or MSG LED indicator is on , it indicates that you have Memo or ICM
message(s). If it is blinking, it indicates that there is new message(s). The blinking counts
mean the number of new messages.
A. PLAYING MESSAGES
In standby mode, press the MEMO or MSG PLAY button on the
base unit . The Excursion
®
39606 will announce “You have
(number) (Memo) message.” and begins playing the first
message to the end. It will announce the message number
before each message.
(Figure 23)