Tuesday =
3
, etc.). The unit will then prompt
“
Enter new time.
”
5.
After hearing a long beep, enter the new hour (01-12).
6.
After two beeps, enter the new minute (00-59).
7.
After two beeps, press
1
for AM, or press
2
for PM. The unit will announce the new day
and time followed by a long beep and will prompt
“
Please enter next command.
”
8.
Press the REMOTE button to exit the remote mode. Otherwise, the remote function will
turn off automatically if not in use for 8 seconds.
TONE / PULSE SETTING
Select the appropriate dialing service by moving the
T/P (Tone / Pulse) switch on the bottom of the base unit:
•
TONE for Tone service, or
•
PULSE for Rotary service. (Figure 12)
TELEPHONE OPERATION
TO PLACE A CALL
1.
Press the TALK button on the handset. The handset
IN USE / BATT LOW LED indicator will flash while the unit (Figure 13) auto-
scans and will light steadily when it finds a clear channel. The CHG / IN USE LED
indicator on the base unit will light steadily when the handset is in use.
2.
Listen for a dial tone.
3.
Dial the telephone number.
4.
When finished with your call, press the TALK button or place the handset on the base
unit.
TO RECEIVE A CALL
NOTE:
If you expect an incoming call, the RINGER OFF / ON switch on the handset must be
set to RING ON position.
A.
IF THE HANDSET IS ON THE BASE
1.
Since the Excursion
®
39606 features
“
Auto-Answer,
”
simply pick up the handset from the
base cradle when the phone rings.
2.
Start your conversation.
3.
When finished with your call, press the TALK button or place the handset on the base
unit.
B.
IF THE HANDSET IS OUT OF THE BASE
1.
Press the TALK button on the handset when the phone rings.
2.
Start your conversation.
3.
When finished with your call, press the TALK button or place the handset on the base
unit.
LAST NUMBER REDIAL
A.
AFTER HEARING A BUSY TONE WHEN PLACING A CALL
1.
If you get a busy tone, press the TALK button to hang up.
2.
Press the TALK button again and listen for a dial tone.
3.
Press the RE/PA button. This will automatically redial the
last telephone number you called (Up to 31 digits). (Figure 14)
B.
WHEN THE HANDSET IS OFF THE BASE UNIT AND IN STANDBY MODE
1.
Press the handset TALK button on the handset and listen for a dial tone.
2.
Press the RE/PA button. This will automatically redial the last telephone number you
called (Up to 31 digits).
MEMORY DIALING (10-Memory
)
Содержание Excursion 39606
Страница 8: ......
