manualshive.com logo in svg

BELIMED WD425E, Руководство по эксплуатации

Поделиться
Скачать
BELIMED WD425E Скачать руководство пользователя страница 21

 

Operating Manual WD 425E

  

 

 

 

 

Rev. 1.

1

, LS                                                                                 Page 21 of 34 

  78563_E rev 1.1.doc 

19. 

Optionally available: Following the program end, a beep is sounded and the display shows „Program 
P3 concluded properly “. Open wash chamber door by pushing door button and remove wash goods.  

20. 

!WARNING!  

Wash goods are hot! Risk of scalding. Racks and inserts must first be cooled down. Drain hot 

water remnants from vessels into the wash chamber. Upon opening the automat, do not im-

mediately touch the heaters, there is risk of burns.

 

21. 

Display shows „Program ready “. 

 

 

!IMPORTANT NOTE! 

• 

To be successful, the disinfection program must be completed, an abort is not allowed at any 

time and for any reason. Should there be an unintentional interruption, the program must be 

reset by means of the ON – OFF button, then restarted. 

• 

In case of an error with program abort by the control system or in case of a program interrup-

tion by the operator, the door will not be unlocked. A program must always be successfully 

completed.

 

• 

Suppressing wash liquid drainage according to 

∫

 18 ISSG Infection Protection Law (BGA / RKI) 

Drainage of wash liquid in case of program interrupt in case of error can be prevented by means of 
„I/O“ button OB / OFF. 
In case of an epidemic, the German Infection Protection Law, paragraph 18, a special epidemics pro-
gram is required. The disinfection phase must be located at the beginning of the program. The first 
wash liquid discharge may be initiated only after the disinfection phase. In case of a program abort, 
the program may not be continued by wash liquid discharge. This requirement has for its purpose the 
prevention of contaminated water reaching the sewage system. 

See Technical Manual; Chapter 

5.6.4 

• 

In case of prolonged idleness of the machine beyond two days, an empty run with self disin-

fection is recommended.  

• 

To prevent cross contamination outside the machine, the outer shell of the machine must be 

periodically cleaned with a disinfectant. 

• 

Units with DI water preheating, the stand-by mode of the DI water is active only  while machine 

is ON. 

 

 

Содержание WD425E



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды