Set of R (Flash) key time
The R (flash) key on TWIST208is set to be use on public line (PSTN) on 100ms but on
some PABX maybe that you need a flash key of a different time, to set:
Press MENU key, by keys select "
BASE SET
" then press OK key,
Type the PIN code (0000 default) then press OK key, wait a moment;
By keys select "
R RECALL
" then press OK to confirm;
By keys select between
"SHORT"
(100ms) and "
LONG
" (250ms) then press OK key.
However on some PABX the TWIST208 flash key will may be not compatible also if
you change the flash time.
Changing of Base PIN code
Press MENU key, by keys select "
BASE SET
" then press OK key,
Type the PIN code (0000 default) then press OK key, wait a moment;
By keys select "
EDIT PIN
" then press OK to confirm;
Enter new PIN (max 4 digits ) and press OK key ;
Enter new PIN again and press OK key to confirm.
Base Reset
Press MENU key, by keys select "
BASE SET
" then press OK key,
Type the PIN code (0000 default) then press OK key, wait a moment;
By keys select "
B reset
" then press OK to confirm;
Press OK key, press again the OK key to confirm the reset or C key to come back on
base menu.
MULTI HANDSET CONFIGURATION
One base station can subscribe up to 4 handsets (up to 3 optional).
Handset subscription
1) Keep pressing the page key of the base for 10 seconds until you heard a doble tone.
From now you have one minute to subscribe one handset.
2) On the handset that you want to subscribe press MENU key then
by keys select
"
REGISTER
", then press OK key;
3)By keys selct "
SUB BASE
" then press OK key;
3) Enter the base number (from 1 to 4). The handset is now searching the base and the
symbol is flashing. When the base is found, the LCD will display the RFPI (the
univocal number assigned on factory at the base, for example 0234H56012);
4) Press OK key and enter the base PIN (0000 factory set).
5) Press OK key to confirm. LCD will display the handset number assigned from the
base.
NOTE: The same procedure above described must be used to subscribe an handset after
an operation of base reset.
When you receive an incoming call, all handsets ring.
When a phone conversation is in progress, on the LCD of all other handsets,
EXT
symbol
will be displayed and no external call will be possible.
The handset number is automatically assigned by the base and correspond at the fist
empty location.
12
ENG
