BELGACOM Forum 523 Скачать руководство пользователя страница 65

Key Extensions

63

Forum Phone 515 / 525 / 535: Extensions and Accessories

The power supply unit is plugged into the last in the series of key 
extensions. 

A system telephone requires a power supply unit if a key exten-
sion is installed. When using PoE, an IP system telephone requires 
no power supply unit.

Connecting the Key Extension

CAUTION! Guard against static charges! 

Static charges can damage the Forum 523/524’s electronic 
components. Make sure you discharge yourself and your 
tools before and during any installation work on the 
Forum 523/524 and any connected terminals. Use dis-
charging underlays or antistatic mats where possible.

Please note:

Never

 attach a key extension to a system tele-

phone that is already connected to Forum 523/524. Pull the net-
work cable out of the socket before screwing the key extension 
onto it.

Configuration

Needs Power Supply 
Unit

U

pn

 system telephone

No

U

pn

 system telephone with 1-3 key 

extensions

Yes

IP system telephone

Yes

IP system telephone with 1-3 key 
extensions

Yes

IP system telephone with PoE (Power 
over Ethernet)

No

IP system telephone with 1-3 key 
extensions and PoE

No

Содержание Forum 523





















































































































































































































































Отзывы: