BELGACOM Forum 523, Руководство по монтажу и пусконаладке, Страница: 154 / 244

152
PBX Networking
PBX Networking
Forum 523/524 provides all the features necessary for PBX net-
working. You need PBX networking in the following cases:
z
To operate the Forum 523/524 as a subsidiary system on
another PBX. This will also allow you to use the Forum 523/
524 as a DECT server, for example.
z
To network several Forum 523/524s into a PBX system.
z
To use flexible configuration possibilities of trunk lines for a
Forum 523/524.
All settings that affect the configuration of PBX networking can be
found in the Configurator menu
Telephony: Trunks and in the
Telephony: Settings dialogue under QSIG linking . Refer also
refer to the corresponding help topics in the Forum 523/524
online help.
You can use ISDN point-to-point connections (Q.SIG or DSS1 pro-
tocol) or IP connections (Q.SIG-IP or SIP tie line protocol) for TK
system networking.
Note: If you do not need the features of PBX networking, the
simplified configuration is sufficient in most cases. For this pur-
pose, assign the preconfigured bundles (bundles)
Multi-terminal
access or System access to the ports. The preconfigured route
called External trunk now makes it possible to seize an external
line immediately or by first dialling the prefix “0”. You can rename
the preconfigured bundle and the preconfigured route if required,
but you cannot delete them.