BELGACOM Forum 523, Руководство по монтажу и пусконаладке, Страница: 227 / 244

LAN 225
Frequently Asked Questions
Question: Another manufacturer’s DECT device is not func-
tioning.
Check whether the DECT device supports the DECT GAP standard.
In the
Configurator , also make sure GAP is set for this DECT
device ( Telephony: Devices: DECT Phones menu).
Question: The startup procedure of the DECT base stations take
a long time? What is the reason?
This behaviour may indicate a problem with the reference clock.
Refer also to
What are some of the causes for problems when
sending and/or receiving faxes? starting on page 223.
LAN
Question: Why is it not possible to establish a network connec-
tion with the Forum 523/524?
Check whether the LEDs for the switch and the PC’s network card
are indicating a connection.
Check the LEDs for the LAN functions of the Forum 523/524. A
green LED above each LAN port indicates whether the network
cable has been properly connected. A blinking green LED indicates
whether there is any network traffic on the line.
To check whether there is a network connection with your
Forum 523/524, enter the “ping IP address” command in “Run” in
the Windows Start menu (e.g. ping 192.168.99.254).
Question: How can I determine the IP address of the Forum 523/
524?
To find out what the IP address is, enter the code number
* 1 8 2
on one of the connected system telephones.
The code-number procedure
* 1 8 3
also displays the net-
work mask.