BELGACOM Forum 300, Руководство пользователя

Страница: 76 / 101

76
3.8.3 IP Address
3.8.4 Port Numbers
This option allows the IP address information
for the system to be defined. There are 6 fields
that can be specified -
The System Name is a name that can be
defined for the system. The purpose of the
name is to allow users to connect more easily
to the system using a browser. When a user
connects to the Ethernet port of the system in
order to access Browser Based Programming,
the system name can be entered in the Browser
in place of the full IP address and port number.
The default system name is Forum.
The IP address of the system
The subnet mask of the connected LAN
A remote user with a PC running Windows (98,
2000, Me, NT) and an ISDN line can dial into
the system and access the LAN. This enables
the remote user to access Browser Based
Programming and any PC connected to the LAN
port of the system. The IP addresses allocated
to the remote users should be entered in the
table shown opposite.
• Click Save to accept new settings
• Click Back to return to the main menu
The system has 4 programmable TCP ports
which have the following functions -
Diagnostic Port : Displays the last 1Mb of
diagnostic information.
Streaming Diagnostic Port : Displays
continuous diagnostic information.
Call Logging Port : Displays call records.
HTTP Port: Used for Browser Based
Programming.
To disable any of these ports, leave the field
empty.
Note : The HTTP Port cannot be disabled. If
left blank, it will default to Port 80.
The following restrictions apply when setting
the port numbers -
1. No port number can be greater than 64000
2. No two port numbers can be the same
3. No port can have the same number as the
following restricted addresses -
80(HTTP Port);5001(TAPI Port); 16686 (ADSL
Card Port);35 (DNS Port); 137 (Net BIOS Name
Service); 138 (Net BIOS Datagram Service).
If any of these restrictions are broken, the page
will be reloaded with the incorrect setting
shown in red. The settings will not have been
saved.
• Click Save to accept new settings
• Click Back to return to the main menu