BELGACOM Forum 300, Руководство пользователя

Страница: 27 / 101

27
• Press < Accept > key
• Scroll down to IP Settings and Ports
• Press < Select >
• Scroll down to Change IP Address
• Enter new address
• Press < Select >
Alternatively, change the IP address of the PC so that it is in the same range as
the syste m. (See user instructions for PC).
Note : If the PC is on a local area network (LAN), it will be necessary to change
the IP address of all the computers on the LAN.
IP Connection Testing -
To check that the IP configuration is correct and both the PC and the system are
on the same network -
At the PC, from Windows -
• go to < Start >
• select < Run >
A window prompting the user to open a program will appear -
•
type " command " (or “ cmd ” in some cases for Windows 2000) in the white
field. The MS-DOS window opens with the following prompt - C:\_
• Type " ipconfig " at the cursor.
The details of the IP configuration of the PC will appear on the window - e.g.
Windows IP Configuration -
IP Address ......................... 192.0.0.200
Subnet Mask ................... 255.255.255.0
Default Gateway ................ 192.0.0.205
Make sure that the configuration that appears on your PC is correct.
In order to test the IP connection between the PC and the system, type "
ping "
followed by the IP address of the system. To test for the example shown above,
type -
C:\Windows\desktop>ping 192.0.0.200
The PC will ping the system address with 32 bytes of data and report the results.
If the IP connection is correct, the results should state -
Packets: Sent=4, Received=4, Lost=0 (0% Lost).
If the IP connection is incorrect, check again that the system and the PC have IP
addresses in the same range and that the cabling connections are correct.
2.7 Call Logging
The system outputs Call Logging Records for all external calls, both incoming and
outgoing. The Call Logging Report can be generated using HyperTerminal over the
Ethernet Connection using a TCP/IP port.