Reference Guide
Load Originals and Load Paper
11
2
Tap the stack on a flat surface to align the edges of the paper, and then
check the paper for the following:
–
Make sure it is free of rips, dust, wrinkles, and curled or bent edges.
–
Make sure all the paper in the stack is the same size and type, unless
you are working with photo paper.
3
Insert paper into the input tray print-side down until it stops. If you are using
letterhead, insert the top of the page first.
Check that the stack of paper contains several sheets but is no higher than
the top of the paper-length guide.
4
Slide the paper-width and paper-length guides in until they stop at the
edges of the paper. Make sure that the paper stack lies flat in the input tray
and fits under the tab of the paper-length guide.
5
Put the output tray back into position.
6
To prevent printed paper from falling off the tray, fully extend the output-tray
extender.
Load envelopes
There are two ways of printing envelopes using your device. Do
not
use
shiny or embossed envelopes, or envelopes that have clasps or windows.
•
If you are printing one envelope, slide it into the envelope slot, which is
located on the right side toward the back of the output tray. Insert the
envelope with the flap up and on the left, as shown in the illustration. Slide
the envelope on the top until it stops.
Titan.book Page 11 Wednesday, February 26, 2003 12:30 PM
Содержание Belgafax 700
