BELGACOM B-BOX, Инструкция по эксплуатации

Страница: 55 / 91

not participate in sending route broadcasts.
Parameter Description
Version Sets the RIP version to use on this interface.
Poison Reverse A method for preventing loops that would cause endless retransmission of data
traffic.
Authentication Required
ƒ
None: No authentication.
ƒ
Password: A password authentication key is included in the packet. If this does not match
what is expected, the packet will be discarded. This method provides very little security
as it is possible to learn the authentication key by watching RIP packets.
ƒ
MD5: An algorithm that is used to verify data integrity through the creation of a 128-bit
message digest from data input (which may be a message of any length) that is claimed
to be as unique to that specific data as a fingerprint is to a specific individual.
Authentication Code Password or MD5 Authentication key.
RIP sends routing-update messages at regular intervals and when the network topology changes.
When a router receives a routing update that includes changes to an entry, it updates its routing
table to reflect the new route. RIP routers maintain only the best route to a destination. After
updating its routing table, the router immediately begins transmitting routing updates to inform
other network routers of the change.
Routing Table
Parameter Description
Flags Indicates the route status:
C = Direct connection on the same subnet.
S = Static route.
55