BELGACOM B-BOX, Инструкция по эксплуатации

Страница: 38 / 91

End IP Domain Name
Specify the start IP address of the DHCP pool. Do not include the gateway address of the
Belgacom b-box in the client address pool. (See “TCP/IP Configuration” on page 3-2). If you
attempt to include the Belgacom b-box gateway address (192.168.1.1 by default) in the DHCP
pool, an error dialog box will appear. If you change the pool range, make sure the first three
octets match the gateway’s IP address, i.e., 192.168.1.xxx.
Specify the end IP address of the DHCP pool.
If your network uses a domain name, enter it here. Otherwise, leave this field blank.
Remember to configure your client PCs for dynamic address allocation. (See “TCP/IP
Configuration” on page 3-2 for details.)
Wireless
The Belgacom b-box also operates as a wireless access point, allowing wireless computers
to communicate with each other. To configure this function, you need to enable the wireless
function, define the radio channel, the domain identifier, and the security options.
Wireless Settings
Check Enable and click “SAVE SETTINGS.”
Channel and SSID
You must specify an Service Set ID (SSID) and a common radio channel to be used by the
Belgacom b-box and all of its wireless clients. Be sure you configure all of its clients to the
same values. The SSID is case-sensitive and can consist of up to 32 alphanumeric
38