BELGACOM B-BOX, Инструкция по эксплуатации

Страница: 31 / 91

Check “Enable Automatic Time Server Maintenance” to automatically maintain the Belgacom b-
box’s system time by synchronizing with a public time server over the Internet. Then configure
two different time servers by selecting the options in the Primary Server and Secondary Server
fields.
Password Settings
Use this page to restrict access based on a password. By default, there is no password.
For security you should assign one before exposing the Belgacom b-box to the Internet.
Passwords can contain from 3 to12 alphanumeric characters and are not case sensitive.
Note: If your password is lost, or you cannot gain access to the user interface, press the reset
button (colored blue) on the rear panel (holding it down for at least five seconds) to
restore the factory defaults. (By default there is no password.)
Enter a maximum Idle Time Out (in minutes) to define a maximum period of time an inactive login
session will be maintained. If the connection is inactive for longer than the maximum idle time, it
will be logged out, and you will have to login to the web management system again. (Default: 10
minutes)
Remote Management
By default, management access is only available to users on your local network. However,
you can also manage the Belgacom b-box from a remote host by entering the IP address of
a remote computer on this screen. Check the Enabled check box, and enter the IP address
of the Host Address and click “SAVE SETTINGS.”
31