BELGACOM B-BOX, Инструкция по эксплуатации

Страница: 43 / 91

See the description of the Access Control features below.
Parameter Description
WEP
WEP
Mode
You can choose disabled, 64-bit or 128-bit
encryption.
Key Entry
Method
When MAC filtering is enabled, all registered
MAC addresses are controlled by the Access
Rule.
Key Provisioning Select static key or dynamic key.
Static WEP Key You may manually enter the keys or automatically generate
Setting encryption keys. To manually configure the keys, enter 10 digits for each 64-bit
key, or enter 26 digits for the single 128bit key. (A hexadecimal digit is a number
or letter in the range 0-9 or A-F.)
Default Key ID Select the default key.
Passphrase For automatic key generation, check the Passphrase box, enter a passphrase
and click “SAVE SETTINGS.”
Key 1-4 If you do not choose to use the Passphrase for automatic key generation, you
must manually enter four keys. For 64-bit encryption, enter exactly 10 digits. For
128-bit encryption, enter exactly 26 digits. (A hexadecimal digit is a number or
letter in the range 0-9 or A-F.)
Click “SAVE SETTINGS” to apply your settings.
WPA
Wi-Fi Protected Access (WPA) combines Temporal Key Integrity Protocol (TKIP) and
802.1x mechanisms. It provides dynamic key encryption and 802.1x authentication service.
43