BELGACOM B-BOX, Инструкция по эксплуатации

Страница: 18 / 91

3. Type “IPCONFIG /RENEW” and press the ENTER key. Verify that your IP Address is now
192.168.1.xxx , your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.1.1 .
These values confirm that your Belgacom b-box is functioning.
Type “EXIT” and press the ENTER key to close the Command Prompt window.
Your computer is now configured to connect to the Belgacom b-box.
Manual IP Configuration
1. Follow steps 1-5 in “DHCP IP Configuration” on page 3-9.
2. Select “Use the following IP Address.”
3. Enter an IP address based on the default network 192.168.1.x (where x is between 2 and
254), use 255.255.255.0 for the subnet mask. and the IP address of the Belgacom b-box
(default: 192.168.1.1) for the Default gateway field.
4. Select “Use the following DNS server addresses.”
5. Enter the IP address for the Belgacom b-box in the Preferred DNS server field. This
automatically relays DNS requests to the DNS server(s) provided by your ISP. Otherwise,
add a specific DNS server into the Alternate DNS Server field and click OK to close the
dialog boxes.
6. Record the configured information in the following table.
18