Belden La 0980 LSL 3010-121-0006-001 Скачать руководство пользователя страница 36

Страница: 36 / 150

7.3 Setting the rotary encoding

switches

7 Starting operation

7.3 Setting the rotary encoding switches

Attention:

Only applicable for LioN-X multiprotocol variants; not

applicable for LioN-Xlight variants.

The LioN-X multiprotocol variants allow you to select different protocols for

communication within an industrial Ethernet system. In this way the IO-Link

Masters with multiprotocol function can be integrated into different networks

without it being necessary to purchase products specific for each protocol.

This technology also gives you the option to use the same IOL-Master in

different environments.
Using rotary encoding switches at the lower front of the devices, you can

easily and conveniently set both the protocol and the address of the device,

if the protocol to be used supports this. Once you have made a protocol

selection and started the cyclical communication, the device stores this

setting permanently and uses the selected protocol from this point on. To use

another supported protocol with this device, perform a factory reset.
The following LioN-X IO-Link Master variants support multiprotocol

application for the protocols EtherNet/IP (E/IP), PROFINET (P), EtherCAT

(EC) and Modbus TCP (MB):

0980 XSL 3912-121-007D-00F

The multiprotocol devices have a total of three rotary encoding switches.

With the first rotary encoding switch (x100) you set the protocol by using the

corresponding switch position. Additionally, x100 is used to set the third last

digit of the IP address for EIP.

Manual EtherCAT®

Version 1.1 04/2021

Содержание La 0980 LSL 3010-121-0006-001























































































































































Результаты поиска

Содержание La 0980 LSL 3010-121-0006-001

Отзывы:

Belden La 0980 LSL 3010-121-0006-001, Руководство пользователя, Страница: 36 / 150

Результаты поиска

Содержание La 0980 LSL 3010-121-0006-001

Отзывы: