13
KMX-4911
Quick Start Guide
To start using the Kaleido-RCP2 with its default settings
1 On the Kaleido-RCP2 unit, press the ENTER button and hold it until the ESC button
lights up.
The following message appears on the LCD display:
Configuration
ROOM SELECTION
2 Press ENTER again to obtain the room list from the multiviewers that are currently
available on the network.
The message
ROOM Select
followed by the name of the first room available appears on
the LCD display.
3 Press the
2
key (to move up in the list) or the
8
key (to move down the list) until the
name of the room you wish to access is displayed.
4 Press ENTER, and then press ESC to exit the configuration menu.
5 Press the LOGIN button.
The following message appears on the LCD display:
LOGIN Position
Admin
6 Press ENTER to log on to your system as
Admin.
A message prompting you for a password appears on the LCD display.
7 Press ENTER again (by default, there is no password).
The message
Access granted
will appear on the LCD display if the login is successful. If
a mouse is connected to the Kaleido-RCP2, then you should be able to see and move
the mouse pointer on the monitor wall.
Configuring a Client PC
The client PC that you will use to communicate with the KMX-4911 multiviewer (via XAdmin
and XEdit) and the multiviewer itself must have IP addresses within the same subnet. The
following procedure applies to a typical Windows 10, Windows 8, or Windows 7 system.
To change the IP address of the client PC
1 Press the Windows key on your keyboard, type “control panel” and then press Enter.
2 In the search box, type “adapter”, and then, under
Network and Sharing Center
, click
View network connections
.
3 In
Network Connections
, right-click the network adapter you wish to configure (e.g.,
Local Area Connection,
or
Ethernet
), and then click
Properties
. If the system prompts you
for an administrator password or confirmation, type the password or provide
confirmation.
The Properties window for the selected network adapter opens.
