Belden Hirschmann OpenBAT BAT-R, Руководство пользователя

Страница: 33 / 76

Installation BAT-R
Release 17 12/2020
33
1.6 Connections for antennas
For the operation of the device you need antennas.
The devices have 3 reverse SMA connections (SMA = Sub-Miniature
Version A) on each WLAN module.
The "Antenna Guide" document provides an overview of the antennas that
can be used as well as the suitable antenna accessories.
The manual is available for download on the Internet:
https://
www.doc.hirschmann.com
1.7 Display elements
After the supply voltage is set up, the Software starts and initializes the
device. Afterwards, the device performs a self-test. During this process,
various LEDs light up.
These actions take less than 1 minute.
1.7.1 Meaning of the LEDs
The following terms describe the behavior of the LEDs:

Regular flashing : the LED switches on and off at regular intervals in the
specified sequence (e.g. red/off).

Brief flashing : the LED lights up very briefly, then remains inactive for a
much longer time (about 10 × as long).
 Inverse flashing : the LED remains inactive for a very short time (about
10 × as long), then lights up for a much longer time (about 10 × as long).

Flickering : the LED switches on and off at irregular intervals.

Running light : coordinated glowing of several LEDs which gives the
optical impression that a light source is moving from left to right and back.
1.7.2 Device state
These LEDs provide information about conditions which affect the operation
of the whole device.
LED display elements for device status
P1 Supply voltage connection 1
P2 Supply voltage connection 2
WLAN1 WLAN module 1
P1
WLAN2
P2
WLAN1