Belden HIRSCHMANN BAT450-F, Руководство пользователя

Страница: 51 / 98

Installation BAT450-F
Release 12 07/2020
51
8 Configuring the transmit power
Note: This chapter does NOT apply to device variants with approval for the
4.9 GHz band (Approvals 2, characteristic value P). For device variants with
approval for the 4.9 GHz band see
“Configuring the transmit power for the
4.9 GHz band” on page 53 .
You have the option to set the transmit power using LANconfig or (error in
org) Webconfig.

Use LANconfig or Webconfig to start the configuration of the device.

In the menu tree, open the Configuration > Wireless LAN > General
dialog.

In the “ General ” tab, specify in the “ General ” frame the country in which
you are installing the device.
If you are using an E-certified device in a vehicle and are driving the
vehicle within the EU, set the country profile for Germany. This country
profile is identical to all the country profiles for EU.

Click the “ Set ” button.
Note: For devices that are operated in the European Union perform the work
steps described in chapter “Obtaining compliance for operation in the
European Union” on page 48 .

In the menu tree, open the Configuration > Wireless LAN > General >
Physical WLAN settings - Radio dialog.

In the “ General ” tab, click in the “ Interface ” column the physical WLAN
interface to which you connect the antenna.