Belden HIRSCHMANN BAT450-F, Руководство пользователя

Страница: 10 / 98

10
Installation BAT450-F
Release 12 07/2020

Lightning protection

The installation of the device occurs in accordance with valid
standards (such as IEC 62305 / DIN EN 62305 (VDE 0185-305)), and
in accordance with the lightning protection procedures recognized and
proven for the application and the environment.

Refer to the information in the “WLAN Outdoor Guide” on “Lightning
and overvoltage protection”.
The manual is available for download on the Internet:
https://
www.doc.hirschmann.com

Protect antennas installed outside with lightning protection devices (for
example lightning conductors).

Take lightning protection measures which mitigate the effects of
lightning strikes.

E marking
The labeled devices comply with the regulations contained in the following
European directive(s):
Regulation No. 10 of the Economic Commission for Europe of the United
Nations (UN/ECE):
Devices with an approval are labeled with the
E type approval mark.
Devices are not specified for operation during the motor start phase.

CE marking
The labeled devices comply with the regulations contained in the following
European directive(s):
2011/65/EU and 2015/863/EU (RoHS)
Directive of the European Parliament and of the Council on the restriction
of the use of certain hazardous substances in electrical and electronic
equipment.
2014/53/EU (RED)
Directive of the European Parliament and of the council on the
harmonization of the laws of the Member States relating to the making
available on the market of radio equipment.
This product may be operated in all EU (European Union)
countries under the condition that it has been configured correctly.