Belden HIRSCHMANN BAT450-F, Руководство пользователя

Страница: 29 / 98

Installation BAT450-F
Release 12 07/2020
29
1.6.2 Supply voltage with the characteristic value N
(110 V DC)
For the power supply of the device, a 4-pin, “A”-coded M12 plug is available.
1.7 Ethernet ports
You have the option to connect end devices or other segments to the ports
of the device via twisted pair cables.
You find information on pin assignments for making patch cables here:
See “Pin assignments” on page 30.
1.7.1 10/100/1000 Mbit/s PoE port
This port is an 8-pin, “X”-coded M12 socket.
The 10/100/1000 Mbit/s PoE port allows you to connect network components
as a PoE power source according to standards IEEE 802.3 10BASE-T/
100BASE-TX/1000BASE-T and IEEE 802.3af.
This port supports:
 Autocrossing (if autonegotiation is activated)
 Autonegotiation

Autopolarity

10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode

100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
 1000 Mbit/s full duplex
 Power over Ethernet
The socket housing is electrically connected with the device housing.
Delivery state: Autonegotiation activated
The PoE power is supplied via the wire pairs transmitting the signal (phantom
voltage).
1.7.2 10/100/1000 Mbit/s twisted pair port
This port is an 8-pin, “X”-coded M12 socket.
The 10/100/1000 Mbit/s twisted pair port allows you to connect network
components according to the IEEE 802.3 10BASE-T/100BASE-TX/
1000BASE-T standard.
This port supports:
 Autocrossing (if autonegotiation is activated)

Autonegotiation

Autopolarity
 10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
 100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
 1000 Mbit/s full duplex
Delivery state: Autonegotiation activated