Belden HIRSCHMANN 70914569, Руководство пользователя

Страница: 9 / 30

Installation SPIDER II 16TX
Release 02 12/2014
9
Subject devices are to be installed in an ATEX Certified IP54 (as defined
in EN 60079-0 and EN 60079-15) enclosure and accessible only by the
use of a tool.
Subject devices are for use in an area of not more than pollution degree
2 in accordance with IEC 60664-1.
Provision shall be made to prevent the rated voltage being exceeded by
the transient disturbances of more than 140 % of the peak rated voltage.
When end users are providing Optical SFP Communications modules,
these must be limited to Laser Class I only.

FCC note:
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference; (2) this device must accept any interference received,
including interference that may cause undesired operation.
Appropriate testing has established that this device fulfills the require-
ments of a class A digital device in line with part 15 of the FCC regula-
tions.
These requirements are designed to provide sufficient protection against
interference when the device is being used in a business environment.
The device creates and uses high frequencies and can also radiate these
frequencies. If it is not installed and used in accordance with this oper-
ating manual, it can cause radio transmission interference. The use of this
device in a residential area can also cause interference, and in this case
the user is obliged to cover the costs of removing the interference.

Recycling note
After usage, this device must be disposed of properly as electronic waste,
in accordance with the current disposal regulations of your county, state,
and country.