Belden Grass Valley XVP-3901-DPI Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 87

Belden Grass Valley XVP-3901-DPI Скачать руководство пользователя страница 44

GUIDE TO INSTALLATION AND OPERATION

38

| XVP-3901-DPI

5.5.3 SD Output – Advanced tab

The

Advanced

tab provides controls over the type and level of detail enhancement that will be performed, and the

color of the mask.

5.5.3.1 Image Processing section

Separate controls are provided for Horizontal and Vertical
detail enhancement:

Horz. Detail Enhancer Mode:

this pull-down box controls the

type of horizontal detail enhancement, which may improve
sharpness of textures and contours.

•

High Freq

boosts high frequencies of the input signal

•

Medium Freq

boosts medium frequencies of the input

signal

Horz. Detail Enhancer

: a slider and a data reporting/entry box

allow the user to select a value in the range 0 (no
enhancement) to 7 (maximum enhancement). The default
value is 1 for HD to SD mode, and 0 for SD to SD mode

Vert Detail Enhancer Mode:

this pull-down box controls the

type of vertical detail enhancement, which may improve
sharpness of textures and contours.

•

High Freq

boosts high frequencies of the input signal

•

Medium Freq

boosts medium frequencies of the input signal

Vert. Detail Enhancer:

a slider and a data reporting/entry box allow the user to select a value in the range -8 (some

softening) to +7 (maximum enhancement). Set the value to 0 for no enhancement. The default value is 1 for HD to SD
mode, and 0 for SD to SD mode

5.5.3.2 Background color section

This color patch (black by default) indicates the color that will be
used for the masks, and will therefore surround the output image
when it does not occupy the full output screen. Click on the

Change

… button to open the Background Colors window. This

window includes YCbCr sliders with data entry boxes, and a color
preview patch. The color is represented by an 8-bit value for each
component.

•

If you have selected an illegal RGB color, it will be flagged
as “Invalid RGB” beneath the color patch, and also within the
color patch shown in the Advanced tab if you apply it. This invalid RGB color will not be clipped by the Gamut
correction. Make sure you select a valid RGB color if you care about Gamut errors.

•

Colors for HD and SD masks are specified independently when the corresponding output format is selected.

Figure 5-26 SD Outputs - Advanced

Figure 5-27 Background colors

«
...
42
43
44
45
46
...
»

Содержание Grass Valley XVP-3901-DPI
























































































Отзывы:

Нет отзывов