Belden Grass Valley XVP-3901-DPI Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 87

Belden Grass Valley XVP-3901-DPI Скачать руководство пользователя страница 34

GUIDE TO INSTALLATION AND OPERATION

28

| XVP-3901-DPI

5.4.3.1 Image Processing section

MPEG Preprocessor Mode:

This control changes the

functionality of the detail enhancer. When MPEG
preprocessor is activated (‘

ON’

), the adaptive detail enhancer

will use a psycho-visual model to increase the level of details
and the sharpness of edges without adding high frequency
content that may be difficult to encode at a lower bit rate on a
downstream MPEG encoder.
When the MPEG preprocessor is deactivated (

OFF

), the

adaptive detail enhancer will increase the details and the
sharpness of edges without causing ringing on the HD output.
In this mode (‘

OFF’

), high frequency content is added to the

HD video output to improve graphic contents and characters.
This setting is very useful for upconverted material in
character generation (CG) applications.

Detail Enhancer:

Enhances the perceived sharpness of fine

detail and edges. A single control adjusts both Horizontal and
Vertical detail enhancement: a slider and a data reporting/entry box allow the user to select a value ranging from

0

(no

enhancement) to

7

(maximum enhancement). The default value varies according to the processing mode: 4 for SD to

HD mode and 0 for HD to HD mode.

5.4.3.2 Background Color section

The color patch (black by default) indicates the color that will be used for the masks, and will therefore surround the
output image when it does not occupy the full output screen. Click on the

Change

… button to open the Background

Colors window. This window includes YCbCr sliders with data entry boxes, and a color preview patch. The color is
represented by an 8-bit value for each component.

•

If you have selected an illegal RGB color, it will be flagged
as “Invalid RGB” beneath the color patch, and also within the
color patch shown in the Advanced tab if you apply it. This
invalid RGB color will not be clipped by the Gamut
correction. Make sure you select a valid RGB color if you
care about Gamut errors.

•

Colors for HD and SD masks are specified independently
when the corresponding output format is selected. The same
color is used in 720p and 1080i.

5.4.4 3G/HD Output – Meta tab

The Meta tab provides resources to deal with Metadata incorporated into the incoming signal. Since the XVP-3901-
DPI HD/3G path is active only with HD/3G input, SD references will be always disable or have no behavior over the
Metadata.

5.4.4.1 Meta / Meta sub-tab

Closed Caption section
Presence:

this icon turns green in the presence of valid incoming EIA-708-B or EIA-608-B closed captioning data as

per SMPTE-334M in the incoming HD source.

Figure 5-14 Video Output 3G/HD – Advanced tab

Figure 5-15 Background color

«
...
32
33
34
35
36
...
»

Содержание Grass Valley XVP-3901-DPI
























































































Отзывы:

Нет отзывов