GUIDE TO INSTALLATION AND OPERATION
HCO-1822 |
17
The graphic and the text at the top of the panel show the
timing of the two inputs with respect to the reference. Input
timing measurements are shown above (Input 1) and below
(Input 2) the user-programmed output timing (shown in
blue). If the measured input timing respects the supported
input window, this measurement will remain green. If not, the
measurement will turn red.
Output Timing
Use the
Vertical
pulldown to offset the output from the
reference by a number of video lines.
3.4.5 The Operation Mode panel
Use the radio buttons in the Operation Format box to choose
whether this HCO-1822 will operate using HD/SD, or ASI.
Figure 3.20 Timing panel
Figure 3.21 Operation Mode Panel
