GUIDE TO INSTALLATION AND OPERATION
HCO-1822
Electromagnetic Compatibility
This equipment has been tested for verification of compliance with FCC Part 15, Subpart B requirements for
Class A digital devices.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
This equipment has been tested and found to comply with the requirements of the EMC directive
2004/108/CE:
•
EN 55022 Class A radiated and conducted emissions
•
ENV 50204 Radiated EMF Immunity – RF 900 MHz Pulsed
•
EN 61000-3-2 Harmonic current emission limits
•
EN 61000-3-3 Voltage fluctuations and flicker limitations
•
EN 61000-4-2 Electrostatic discharge immunity
•
EN 61000-4-3 Radiated electromagnetic field immunity – radio frequencies
•
EN 61000-4-4 Electrical fast transient immunity
•
EN 61000-4-5 Surge transient immunity
•
EN 61000-4-6 Conducted disturbances immunity
•
EN 61000-4-11 Voltage-dips, short-interruption and voltage variation immunity
