Belden 934 692-001 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 64

Belden 934 692-001 Скачать руководство пользователя страница 53

The integrated web server

Technical manual LioN-P/ -R PROFINET

Release 1.2 02/2016

8.3 The Status page

53

8.3

The Status page

In the top section, this page provides information about the current status of
the I/O channels and diagnostics. The I/O data is specified in the form of two
bytes in hexadecimal notation. The diagnostics of the modules includes five
bytes.

The lower section of the status page contains information about the current
status of the two Ethernet ports of the modules in regard to connection,
transmission rate, and transmission mode.

In the "General Information" area, you will find the following system-related
information on the runtime of the modules, firmware versions, and
manufacturing information.

The status information on this page is updated in a web browser only after
reopening or refreshing of the page.

Note

Please note that if you reset the modules to the factory settings, the
PROFINET name and IP address are also reset to the default values. It may
not be possible to access the web server of the modules and exchange data
in the PROFINET network after the reset.

«
...
51
52
53
54
55
...
»

Содержание 934 692-001

































































Отзывы:

Нет отзывов