Belar FMHD-1 Скачать руководство пользователя страница 2

Страница: 2 / 58

WARRANTY, FACTORY RECALIBRATION AND FACTORY SERVICE

OR ASSISTANCE

•

CONTACT YOUR

BELAR

ALES

EPRESENTATIVE

•

USTOMER

ERVICE AT THE

BELAR

FACTORY

Immediately upon receiving your equipment, please make a careful inspection for any shipping damage.

If damage is found or suspected, please notify the carrier at once and then contact your dealer or the

BELAR

factory. We strongly encourage you to save the shipping carton and shipping materials supplied

with your equipment. They are specially designed to properly protect your equipment, and in the event

that you need to return it for service, only these OEM shipping materials can ensure its safe return to our

factory.

All

BELAR

products are warranted against defects in materials and workmanship. This warranty applies

for one year from the date of delivery, FOB factory or, in the case of certain major components listed in

the instruction manual, for the specified period.

BELAR

will repair or replace products which prove to be

defective during the warranty period provided that they are returned to

BELAR

pre-paid. No other

warranty is expressed or implied.

BELAR

is not liable for consequential damages.

ETURN

ATERIAL

UTHORIZATION

UMBER MUST BE OBTAINED FROM

BELAR

ADVANCE OF RETURN

Please call (610-687-5550) or email ([email protected]) to request an RMA number to display on the outside of your

shipping carton and all paperwork.

A written statement with the name, address, telephone number & email address together with a brief description of the

work requested, must accompany all returns.

The customer shall be responsible for all costs of transportation and insurance to and from the

BELAR

factory, and all such costs must be prepaid.

LEASE VISIT

WWW

BELAR

COM AND REGISTER YOUR PRODUCT SO WE MAY KEEP YOU

INFORMED OF THE LATEST HARDWARE AND SOFTWARE UPDATES

We no longer ship PC Control Software with the units. Please visit

www.belar.com

and download the

latest

WizWin© and Server PC Control Software

. Software updates will be posted on our website

periodically. The

FMHD-1

can be updated in the field using the PC Software.

Содержание FMHD-1



























































Результаты поиска

Содержание FMHD-1

Отзывы:

Бренды по названию

Популярные бренды

Belar FMHD-1, Руководство оператора

Результаты поиска

Содержание FMHD-1

Отзывы:

Бренды по названию

Популярные бренды