24 / EN
Built-in hob / User manual
8
Troubleshooting
Clanging is heard while the product is
heating and cooling.
• When the metal parts are heated, they may expand and make
noise. >>> This is not a failure.
There is no ignition spark.
• Power is cut. >>> Check the fuses in the fuse box.
The product is continuously sparking.
• The effluent fluids may have penetrated into the ignition
mechanism under the control knobs. >>> Unplug the product
and wait for it to cool.
There is no gas.
• Main gas valve is shut off. >>> Turn on the gas valve.
• The pipe has leaned. >>> Install the gas pipe properly.
Burners are not burning properly or at
all.
• Burners are dirty. >>> Clean the burner components.
• Burners are wet. >>> Dry the burner parts.
• Burner cap is not securely positioned. >>> Position the
burner cap correctly.
• Main gas valve is shut off. >>> Turn on the gas valve.
• Gas cylinder is empty (when using LPG). >>> Replace the
gas cylinder.
• The burner knob/button has not been hold pressed enough
during ignition. >>> Ignite the burner by pressing and holding
for at least 3-5 seconds.
C
Consult the call centre if you can not remedy
the trouble although you have implemented
the instructions in this section. Never attempt
to repair a defective product by yourself.
