19 / EN
Built-in hob / User manual
6
Using the hob
General information about cooking
Never fill the pan with oil more than one third
of it. Do not leave the hob unattended when
heating oil. Overhea-ted oils bring risk of fire.
Never attempt to extinguish a possible
fire with water!
When oil catches fire,
cover it with a fire blanket or damp cloth.
Turn off the hob if it is safe to do so and call
the fire department.
• Before frying foods, always dry them well and gently place
into the hot oil. Ensure complete thawing of frozen foods before
frying.
• Do not cover the vessel you use when heating oil.
• Place the pans and saucepans in a manner so that their
handles are not over the hob to prevent heating of the handles.
Do not place unbalanced and easily tilting vessels on the hob.
• Do not place empty vessels and saucepans on cooking zones
that are switched on. They might get damaged.
• Operating a cooking zone without a vessel or saucepan on it
will cause damage to the product. Turn off the cooking zones
after the cooking is complete.
• As the surface of the product can be hot, do not put plastic
and aluminum vessels on it. Such vessels should not be used
to keep foods either.
• Use flat bottomed saucepans or vessels only.
• Put appropriate amount of food in saucepans and pans.
Thus, you will not have to make any unnecessary cleaning by
preventing the dishes from overflowing. Do not put covers of
saucepans or pans on coo-king zones.
Place the saucepans in a manner so that they are centered on
the cooking zone. When you want to move the saucepan onto
another cooking zone, lift and place it onto the cooking zone
you want instead of sliding it.
Gas cooking
• Size of the vessel and the flame must match each other.
Adjust the gas flames so that they will not extend the bottom
of the vessel and cen-ter the vessel on saucepan carrier. Using
the hobs
Using the hobs
Large flame symbol indicates the highest cooking power and
small flame symbol indicates the lowest cooking symbol. In
turned off position (top), gas is not supplied to the burners.
Igniting the gas burners
1. Keep burner knob pressed.
2. Turn it counter clockwise to large flame symbol. Gas is ignit-
ed with the spark created.
3. Adjust it to the desired cooking power.
Turning off the gas burners
Turn the keep warm zone knob to off (upper) position.
Gas shut off safety system (in models
with thermic component)
Gas shut off safety
