Beko BGMPI 090, Руководство пользователя, Страница: 18 / 124

18 / 124 EN
Multi Split Type Air Conditioner / User Manual
3
Unit speci
fications and features
To further optimize the performance of your
unit, do the following
•
Keep doors and windows closed.
•
Limit energy usage by using TIMER ON and
TIMER OFF functions.
• Do not block air inlets or outlets.
• Regularly inspect and clean air filters.
3�2 Features
Install the HomeWhiz kit (wireless
module)
1. Remove the protective cap of the HomeWhiz kit
(wireless module)
2. Open the front panel and insert the HomeWhiz
kit (wireless module) into the reserved interface.
Insert
A
Warning:
This interface is only compatible
with HomeWhiz kit (wireless
module) provided by the
manufacturer.
Protection of the air conditioner
Compressor protection
The compressor cannot restart for 3 minutes after
it stops.
Anti-cold air (Cooling and heating
models only)
The unit is designed not to blow cold air on HEAT
mode, when the indoor heat exchanger is in
one of the following three situations and the set
temperature has not been reached.
•
When heating has just started.
• During defrosting.
• Low temperature heating.
The indoor or outdoor fan stop running when
defrosting (Cooling and heating models only).
Defrosting (Cooling and heating models
only)
• Frost may be generated on the outdoor unit
during a heat cycle when outdoor temperature
is low and humidity is high resulting in lower
heating effciency in the air conditioner.
•
Under these conditions, the air conditioner will
stop heating operations and start defrosting
automatically.
• The time to defrost may vary from 4 to 10
minutes, depending the outdoor temperature
and the amount of frost buildup on the outdoor
unit.
Auto-Restart (some models)
In case of power failure, the system will immediately
stop. When power returns, the Operation light on
the indoor unit will flash. To restart the unit, press
the ON/OFF button on the remote control. If the
system has an auto restart function, the unit will
restart using the same settings.
White mist emerging from the indoor
unit
•
A white mist may be generated due to a large
temperature difference between air inlet and
air outlet on COOL mode in places with high
relative humidity.