Beko BEHPI 090 страница 54 Скачать руководство пользователя

Страница: 54 / 120

54 / 120 EN

Split-type room air conditioner / Installation Manual

Information servicing

(Required for the units adopt R32/R290 refrigerant only)

1. Checks to the area

Prior to beginning work on systems containing flammable refrigerants, safety checks are necessary

to ensure that the risk of ignition is minimised. For repair to the refrigerating system, the following

precautions shall be complied with prior to conducting work on the system.

2. Work procedure

Works shall be undertaken under a controlled procedure so as to minimise the risk of a flammable gas

or vapour being present while the work is being performed.

3. General work area

All mintenance staff and others working in the local area shall be instructed on the nature of work

being carried out. Work in confined spaces shall be avoided. The area around the work space shall be

sectioned off. Ensure that the conditions within the area have been made safe by control of flammable

material.

4. Checking for presence of refrigerant

The area shall be checked with an appropriate refrigerant detector prior to and during work, to

ensure the technician is aware of potentially flammable atmospheres. Ensure that the leak detection

equipment being used is suitable for use with flammable refrigerants, i.e. no sparking, adequately

sealed or intrinsically safe.

5. Presence of fire extinguisher

If any hot work is to be conducted on the refrigeration equipment or any associated parts, appropriate

fire extinguishing equipment shall be available to hand. Have a dry power or CO2 fire extinguisher

adjacent to the charging area.

6. No ignition sources

No person carrying out work in relation to a refrigeration system which involves exposing any pipe

work that contains or has contained flammable refrigerant shall use any sources of ignition in such a

manner that it may lead to the risk of fire or explosion. All possible ignition sources, including cigarette

smoking, should be kept sufficiently far away from the site of installation, repairing, removing and

disposal, during which flammable refrigerant can possibly be released to the surrounding space. Prior

to work taking place, the area around the equipment is to be surveyed to make sure that there are no

flammable hazards or ignition risks. "NO SMOKING" signs shall be displayed.

7. Ventilated area

Ensure that the area is in the open or that it it adequately ventilated before breaking into the system

or conducting any hot work. A degree of ventilation shall continue during the period that the work

is carried out. The ventilation should safely disperse any released refrigerant and preferably expel it

externally into the atmosphere.

Содержание BEHPI 090

























































































































Результаты поиска

Содержание BEHPI 090

Отзывы:

Похожие инструкции для BEHPI 090

Бренды по названию

Популярные бренды

Beko BEHPI 090, Руководство по установке

Результаты поиска

Содержание BEHPI 090

Отзывы:

Похожие инструкции для BEHPI 090

Бренды по названию

Популярные бренды