2
1. Description
2. Operation
2.1 Controls
2.2 Displays
3. Intrinsic Safety Certification
3.1 ATEX certificate
3.2 4/20mA input
3.3 Reset terminals
3.4 Reset
terminals
3.5
Certification label information
4. System Design for Hazardous Areas
ATEX certification
4.1
Flow transmitter loops
4.2
Remote indication
4.3
Resetting the total display
5. Installation
5.1
Location
5.2
Installation procedure
5.3
EMC
6. Programming and Calibration
6.1
Calibration structure
6.2
Accessing programme functions
6.3
Summary of programmable
functions
6.4 Root
extractor
6.5 Resolution
6.6
Position of decimal place
6.7
Calibration of the rate display
using an external current source
6.8
Calibration of the rate display
using internal reference
6.9 Conditioning
sub-menu
6.9.1 AC rejection
6.9.2 Calibration of internal
references
6.10 Resetting grand total
6.11 Timebase
6.12 Function of the P push-button
6.13 Total scale factor
6.14 Percentage clip-off
6.15 Local reset of total display
6.16 Security code
6.17 Over and under-range
7. Calibration Examples
7.1 Using an external current source
7.2 Using the internal references
8. Maintenance
8.1 Fault finding during commissioning
8.2 Fault finding after commissioning
8.3 Servicing
8.4 Routine maintenance
8.5 Guarantee
8.6 Customer comments
9. Accessories
9.1 Scale card
9.2 Tag number
9.3 Alarms
9.3.1 Solid state output
9.3.2 Intrinsic safety
9.3.3 Programming and
adjustment
9.3.4 Alarm enable
9.3.5 Type of alarm
9.3.6 Setpoint adjustment
9.3.7 Alarm function
9.3.8 Alarm output status
9.3.9 Hysteresis
9.3.10 Alarm delay
9.3.11 Alarm silence time
9.2.12 Access setpoint
9.2.13 Adjusting alarm setpoints
from display mode.
9.4 Display backlight
9.5 Additional front panel protection
10. Index
CONTENTS
The
BA358C is CE marked to show compliance with the European Explosive Atmospheres
Directive 94/9/EC and the European EMC Directive 2004/108/EC
