Beijing Starfire Control Technology Co.,Ltd.
北京斯达峰控制技术有限公司
Model SF-2012AH-QG
Cutting Machine
(
C002
)
7
5.1.3
【
F3
】
SAVE
To save program. After a program is edited and ready to save, the system will prompt:
Enter program name: 1234.TXT
The system will display the current program name, which is modifiable.
If ENTER key is pressed, the
program in the editing area will be saved into the program area under the selected name; if [ESC] key is
pressed, the save function will be abandoned.
Notes:
1
)
The program name and extension name should never exceed 12 characters.
2
)
For large-sized program above 200K, it is allowed to work along with USB disk instead of saving
it.
5.1.4.
【
F4
】
DELE
It is used to delete the program in the user program area.
5.1.5.
【
F5
】
DELL
To delete a full program line in editing area and improve editing efficiency.
5.1.6.
【
F6
】
TRAN
To transmit programs. This system supports to transmit programs with USB disk. Press [F6] key to enter
the lower level of menu, as shown below.
:
[F1] Input: to transmit program from USB disk to the machining program space.
[F2] output: to output the machining program to USB disk from the machining program space.
5.1.7.
【
F7
】
SEARCH STRING
This feature is not provided yet. It is reserved for subsequent upgrading.
Fig. 5.2 Transmission menu of USB disk