QTERM-IV/P40 User's Manual
13
Beijer Electronics Fax 801-466-8792 Web www.beijerelectronicsinc.com Phone 801-466-8770
A -
Set the current User Area page
B -
Get the current User Area page
GET NUMBER OF USER AREA PAGES: This command
tells the QTERM to return two ASCII characters (MSB and
LSB) indicating the total number of User Area pages avail-
able.
SET CURRENT USER AREA PAGE: This command sets
the currently active User Area page to the value specified
by ## (MSB and LSB). GET CURRENT USER PAGE: This
command tells the QTERM to return two ASCII characters
(MSB and LSB) indicating the currently active page num-
ber.
2.2.52
Macro String Execution -
]
p #
This command allows you to “execute” any of the 48 macro
strings defined in the QDATA file (see Chapter 3 for more
information on using the QDATA file). Since macro strings
can contain commands to the QTERM, data for the host
and/or data for the QTERM, a single macro string can con-
figure almost any aspect of the QTERM operation. The
value of # can vary from “@” (macro 00) to “o” (macro
47). For example, the string
]
p A
will execute the macro string stored in the QDATA file
under the “A” location.
2.2.53
Query Multidrop Buffer -
]
q
This command (ignored by non-multidrop units) causes the
QTERM to return its multidrop buffer as the response
packet. Do not send this command in the same packet with
other response-generating commands, or as a part of a
broadcast event.
If the multidrop buffer is empty, or this command is sent to
the QTERM-IV during EDIT mode, the QTERM-IV will
return a Null packet.
